Lanoguard Remover
Effortless Removal of Lanoguard Coatings – Safe, Easy & Effective
Lanoguard Remover is the ultimate solution for effortlessly stripping away Lanoguard coatings – whether freshly applied or fully cured. Specially formulated to break down and lift Lanoguard without the mess or effort typically required with conventional underseals, this remover is a must-have for classic car restorers, DIY mechanics, and anyone maintaining a vehicle underbody.
Unlike tar-like underseals that are stubborn and time-consuming to remove, Lanoguard Remover works quickly and cleanly – no excessive scraping. Simply spray, dwell, and rinse. It’s that easy.
Key Features
-
Efficient & Powerful – Dissolves even fully cured Lanoguard underseal without excessive scrubbing or abrasion.
-
Multi-Purpose – Ideal for removing overspray, stripping back for reapplication, cleaning brushes, and flushing spray guns.
-
Safe for Sensitive Areas – Can be used on engine parts, bearings, rubber, gearboxes, electrical parts, and circuit boards.
-
Gentle Yet Effective – No harsh solvents, but powerful enough to remove cured protection layers with ease.
How to Use
✔ For Removing Overspray:
Apply a small amount to a cloth – do not spray directly. Gently wipe the overspray and buff off immediately. Use carefully, as any contact with areas meant to stay protected will remove Lanoguard.
✔ For Cleaning Tools:
Use Lanoguard Remover to clean application brushes and spray guns. Follow immediately with a wash using warm soapy water, then rinse again with clean warm water to remove all residue before reuse.
✔ For Removing Fully Cured Lanoguard:
-
Spray Lanoguard Remover evenly over the area using a trigger or pressure sprayer.
-
Let it dwell for 5 minutes.
-
Jet wash the area thoroughly – the old Lanoguard will lift away.
-
Repeat the process if necessary for thicker coats.
⚠ Note: Lanoguard Remover will also remove ceramic coatings – use with care.
Why Choose Lanoguard Remover?
This product has been developed, tried, and tested with extensive research to match Lanoguard’s high performance and standards. It's specifically engineered to work in harmony with Lanoguard underbody protection products – giving you full control over your protection system, from application to removal.
Trusted by Enthusiasts and Professionals
Whether you're restoring a classic car, prepping for a fresh Lanoguard treatment, or just tidying up overspray, Lanoguard Remover delivers the performance you need – safely, quickly, and responsibly.
If you need more guidance on how to use Lanoguard Remover or want to check compatibility with other surfaces or coatings, get in touch with our support team.
Description
Effortless Removal of Lanoguard Coatings – Safe, Easy & Effective
Lanoguard Remover is the ultimate solution for effortlessly stripping away Lanoguard coatings – whether freshly applied or fully cured. Specially formulated to break down and lift Lanoguard without the mess or effort typically required with conventional underseals, this remover is a must-have for classic car restorers, DIY mechanics, and anyone maintaining a vehicle underbody.
Unlike tar-like underseals that are stubborn and time-consuming to remove, Lanoguard Remover works quickly and cleanly – no excessive scraping. Simply spray, dwell, and rinse. It’s that easy.
Key Features
-
Efficient & Powerful – Dissolves even fully cured Lanoguard underseal without excessive scrubbing or abrasion.
-
Multi-Purpose – Ideal for removing overspray, stripping back for reapplication, cleaning brushes, and flushing spray guns.
-
Safe for Sensitive Areas – Can be used on engine parts, bearings, rubber, gearboxes, electrical parts, and circuit boards.
-
Gentle Yet Effective – No harsh solvents, but powerful enough to remove cured protection layers with ease.
How to Use
✔ For Removing Overspray:
Apply a small amount to a cloth – do not spray directly. Gently wipe the overspray and buff off immediately. Use carefully, as any contact with areas meant to stay protected will remove Lanoguard.
✔ For Cleaning Tools:
Use Lanoguard Remover to clean application brushes and spray guns. Follow immediately with a wash using warm soapy water, then rinse again with clean warm water to remove all residue before reuse.
✔ For Removing Fully Cured Lanoguard:
-
Spray Lanoguard Remover evenly over the area using a trigger or pressure sprayer.
-
Let it dwell for 5 minutes.
-
Jet wash the area thoroughly – the old Lanoguard will lift away.
-
Repeat the process if necessary for thicker coats.
⚠ Note: Lanoguard Remover will also remove ceramic coatings – use with care.
Why Choose Lanoguard Remover?
This product has been developed, tried, and tested with extensive research to match Lanoguard’s high performance and standards. It's specifically engineered to work in harmony with Lanoguard underbody protection products – giving you full control over your protection system, from application to removal.
Trusted by Enthusiasts and Professionals
Whether you're restoring a classic car, prepping for a fresh Lanoguard treatment, or just tidying up overspray, Lanoguard Remover delivers the performance you need – safely, quickly, and responsibly.
If you need more guidance on how to use Lanoguard Remover or want to check compatibility with other surfaces or coatings, get in touch with our support team.
